Metrohm 797 VA Computrace Manual do Utilizador descarregar pdf (Página 187)

6.2 Calibration techniques with CVS and CPVS

797 VA Computrace – Software

175

bration curves additionally without date and time

on the General tab of the GENERAL SETTINGS

window is checked.

Volume VMS (mL) [ > 0 mL ; 10 mL]

The volume of the Virgin Make-up Solution (see

VMS (Virgin Make-up Solution), section 6.4).

Cell volume (mL) [ > 0 mL ; 10 mL ] [ read only ]

Total volume of solution (equal to the volume of

the VMS (Virgin Make-up Solution)) in the measu-

ring vessel at the start of the determination. The

sample concentrations Conc. calculated refers to

this cell volume.

Initial electrode conditioning (see Initial electrode conditioning,

section 6.3)

Check the checkbox to use conditioning.

No. of conditioning measurements [ 1...100 ; 1 ]

Number of replications of conditioning measure-

ments. The “total number of conditioning measu-

rements” is the No. of conditioning measurements

multiplied with the number of Save last .. sweeps

(Voltammetric tab). “Total number of conditioning

measurements” must not exceed 100.

or Auto Std.dev (%)[ >0.1 ; 1 ]

Define until which „Std.dev.“ the conditioning is

continued. The „Std.dev.“ is calculated from all sa-

ved sweeps of the last two “conditioning meas-

urements”.

Note: If you set a small value (e.g. < 1%), it can

take a long time until reaching the target.

Note: If both No. of conditioning measurements [

1...100 ; 1 ] and Auto Std.dev (%) [ >0.1 ; 1 ] are

activated, the conditioning is finished as soon as

the first of the two criterias is reached.

Addition mixing time [ 0...80600 s ; 10 s ]

Time of mixing after Additions (for the first measu-

rement, the

Initial mixing time is used).

No. of replications [ 1...10 ; 2 ]

Number of replications (= total number of measu-

rements) for each variation (sample, standard ad-

dition, calibration level, conditioning measure-

ment). For cyclic modes (CV, CVS, CPVS) the “total

number of measurements” is the No. of repli-

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 294 295

Comentários a estes Manuais

Sem comentários

Metrohm 797 VA Computrace Manual do Utilizador Página 187

Comentários a estes Manuais

Manuais e produtos relacionados com Software Metrohm 797 VA Computrace