881 Compact IC pro881 Compact IC pro – AnionManual8.881.8013EN
5.13 Quality Management and validation with Metrohm■■■■■■■■■■■■■■■■■■■■■■90■■■■■■■■881 Compact IC pro – Anionprecise terms and conditions involved in
■■■■■■■■■■■■■■■■■■■■■■6 Troubleshooting881 Compact IC pro – Anion■■■■■■■■916 Troubleshooting6.1 Problems and their solutionsProblem Cause RemedyMark
6.1 Problems and their solutions■■■■■■■■■■■■■■■■■■■■■■92■■■■■■■■881 Compact IC pro – AnionProblem Cause RemedySample – blockage in thesample path.Chec
■■■■■■■■■■■■■■■■■■■■■■6 Troubleshooting881 Compact IC pro – Anion■■■■■■■■93Problem Cause RemedyPoor reproducibilityof the retentiontimesEluent – Leak
6.1 Problems and their solutions■■■■■■■■■■■■■■■■■■■■■■94■■■■■■■■881 Compact IC pro – AnionProblem Cause RemedyPrecision problems -significant scatter-
■■■■■■■■■■■■■■■■■■■■■■7 Technical specifications881 Compact IC pro – Anion■■■■■■■■957 Technical specifications7.1 Reference conditionsThe technical
7.5 Housing■■■■■■■■■■■■■■■■■■■■■■96■■■■■■■■881 Compact IC pro – Anion7.5 HousingDimensionsWidth 302 mmHeight 562 mmDepth 368 mmMaterial of basetray,
■■■■■■■■■■■■■■■■■■■■■■7 Technical specifications881 Compact IC pro – Anion■■■■■■■■97Pressure rangePump 0…50.0 MPa (0…500 bar)Pump head 0…35.0 MPa (0…3
7.10 Peristaltic pump■■■■■■■■■■■■■■■■■■■■■■98■■■■■■■■881 Compact IC pro – Anion7.10 Peristaltic pumpType 2-channel peristaltic pumpRotating direction
■■■■■■■■■■■■■■■■■■■■■■7 Technical specifications881 Compact IC pro – Anion■■■■■■■■99Detector 1 DSUB-15-pin high density (female)Column recogni-tionfor
■■■■■■■■■■■■■■■■■■■■■■1 Introduction881 Compact IC pro – Anion■■■■■■■■11 Introduction1.1 Instrument descriptionThe instrument 881 Compact IC pro – A
7.16 Weight■■■■■■■■■■■■■■■■■■■■■■100■■■■■■■■881 Compact IC pro – Anion7.16 Weight1.881.0020 21.3 kg (without accessories)
■■■■■■■■■■■■■■■■■■■■■■8 Conformity and warranty881 Compact IC pro – Anion■■■■■■■■1018 Conformity and warranty8.1 Declaration of ConformityThis is to
8.2 Quality Management Principles■■■■■■■■■■■■■■■■■■■■■■102■■■■■■■■881 Compact IC pro – AnionThis instrument meets the requirements of the ETL Listed M
■■■■■■■■■■■■■■■■■■■■■■8 Conformity and warranty881 Compact IC pro – Anion■■■■■■■■103Software developmentSoftware development occurs in terms of the so
8.3 Warranty (Guarantee)■■■■■■■■■■■■■■■■■■■■■■104■■■■■■■■881 Compact IC pro – AnionFor third-party components that are recognizable as such, the manuf
■■■■■■■■■■■■■■■■■■■■■■9 Accessories881 Compact IC pro – Anion■■■■■■■■1059 AccessoriesNoteSubject to change without notice.9.1 Scope of delivery 2.88
9.1 Scope of delivery■■■■■■■■■■■■■■■■■■■■■■106■■■■■■■■881 Compact IC pro – AnionQty. Order no. Description2 6.1608.020 Glass bottle / 1000 mL / GL 45B
■■■■■■■■■■■■■■■■■■■■■■9 Accessories881 Compact IC pro – Anion■■■■■■■■107Qty. Order no. Description1 6.1803.040 PTFE capillary 0.5 mm i.d. / 1 mCapilla
9.1 Scope of delivery■■■■■■■■■■■■■■■■■■■■■■108■■■■■■■■881 Compact IC pro – AnionQty. Order no. Description2 6.1816.020 Silicone tubing 6 mm i.d. / 1 m
■■■■■■■■■■■■■■■■■■■■■■9 Accessories881 Compact IC pro – Anion■■■■■■■■109Qty. Order no. Description1 6.2322.010 PRIMUS multi anion standard solution:Pr
1.1 Instrument description■■■■■■■■■■■■■■■■■■■■■■2■■■■■■■■881 Compact IC pro – Anionof 2 µm can be replaced quickly and easily. They remove particles l
9.1 Scope of delivery■■■■■■■■■■■■■■■■■■■■■■110■■■■■■■■881 Compact IC pro – AnionQty. Order no. Description1 6.2621.050 1/4 in. wrenchFor 1/4 in. screw
■■■■■■■■■■■■■■■■■■■■■■9 Accessories881 Compact IC pro – Anion■■■■■■■■111Qty. Order no. Description1 6.2626.000 Front drain nozzleDrain nozzle for Prof
9.1 Scope of delivery■■■■■■■■■■■■■■■■■■■■■■112■■■■■■■■881 Compact IC pro – AnionQty. Order no. Description2 6.2744.020 Luer/UNF couplingFor IC instrum
■■■■■■■■■■■■■■■■■■■■■■9 Accessories881 Compact IC pro – Anion■■■■■■■■113Qty. Order no. Description2 6.2744.180 Pump tubing connection with safety devi
9.2 Optional accessories■■■■■■■■■■■■■■■■■■■■■■114■■■■■■■■881 Compact IC pro – AnionQty. Order no. Description1 6.2821.090 Aspiration filterPore size 2
■■■■■■■■■■■■■■■■■■■■■■9 Accessories881 Compact IC pro – Anion■■■■■■■■115Order no. Description6.2741.040 PE/PTFE piston seal MacroFor all Macro pump he
9.2 Optional accessories■■■■■■■■■■■■■■■■■■■■■■116■■■■■■■■881 Compact IC pro – AnionOrder no. Descriptionall system components and the chromatography r
■■■■■■■■■■■■■■■■■■■■■■Index881 Compact IC pro – Anion■■■■■■■■117IndexNumbers/Symbols6.2821.090 aspiration filter ... 64(6.2821.130) Filter ...
Index■■■■■■■■■■■■■■■■■■■■■■118■■■■■■■■881 Compact IC pro – AnionSuppressor ... 50InstrumentConnect ...
■■■■■■■■■■■■■■■■■■■■■■Index881 Compact IC pro – Anion■■■■■■■■119Valvesee also "Injection valve" ... 37Valves of the high pressure pump...
■■■■■■■■■■■■■■■■■■■■■■1 Introduction881 Compact IC pro – Anion■■■■■■■■31.2 Intended useThe instrument 881 Compact IC pro – Anion is used for the ion
1.4 Safety instructions■■■■■■■■■■■■■■■■■■■■■■4■■■■■■■■881 Compact IC pro – AnionCautionThis symbol draws attention to a possible damage ofinstruments
■■■■■■■■■■■■■■■■■■■■■■1 Introduction881 Compact IC pro – Anion■■■■■■■■5Mains voltageWarningAn incorrect mains voltage can damage the instrument.Only o
1.4 Safety instructions■■■■■■■■■■■■■■■■■■■■■■6■■■■■■■■881 Compact IC pro – Anion1.4.5 Recycling and disposalThis product is covered by European Direc
■■■■■■■■■■■■■■■■■■■■■■2 Overview of the instrument881 Compact IC pro – Anion■■■■■■■■72 Overview of the instrument2.1 Front11023475 68119Figure 1 Fro
2.1 Front■■■■■■■■■■■■■■■■■■■■■■8■■■■■■■■881 Compact IC pro – Anion9Column holderWith column recognition.10Peristaltic pump11Metrohm Suppressor Module
■■■■■■■■■■■■■■■■■■■■■■2 Overview of the instrument881 Compact IC pro – Anion■■■■■■■■92.2 Rear14151617182021192211121312453781096Figure 2 Rear 881 Com
2.2 Rear■■■■■■■■■■■■■■■■■■■■■■10■■■■■■■■881 Compact IC pro – Anion3Drainage tubing connectorFor connecting the drainage tubing whichleads away escaped
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■113 Installation3.1 About this chapterThe Installation chapter contains:■ this
3.2 Initial installation■■■■■■■■■■■■■■■■■■■■■■12■■■■■■■■881 Compact IC pro – Anion 3Connecting the eluent path■ Lead the eluent aspiration tubing (6.1
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■13■ Plug a tubing olive (6.2744.034) into one end of the pump tubing(6.1826.320)
3.3 Installation diagram■■■■■■■■■■■■■■■■■■■■■■14■■■■■■■■881 Compact IC pro – Anion■ Rinse the instrument without column with eluent for 5 minutes. 9In
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■152125337891011121314151617183192036433Figure 3 Installation diagram 881 Compact
3.4 Setting up the instrument■■■■■■■■■■■■■■■■■■■■■■16■■■■■■■■881 Compact IC pro – Anion3PEEK pressure screws, short(6.2744.070)4Detector inlet capilla
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■17The instrument should be protected against excessive temperature fluctu-ations
3.5 Capillary connections in the IC system■■■■■■■■■■■■■■■■■■■■■■18■■■■■■■■881 Compact IC pro – AnionConnection capillariesPEEK capillaries and PTFE ca
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■19Creating dead volume free capillary connectionsTo create dead volume free capi
Metrohm AGCH-9100 HerisauSwitzerlandPhone +41 71 353 85 85Fax +41 71 353 89 [email protected] Compact IC pro881 Compact IC pro – An
3.6 Rear of the instrument■■■■■■■■■■■■■■■■■■■■■■20■■■■■■■■881 Compact IC pro – AnionWarningIn order to avoid damage to the pumps, the transport lockin
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■21123Figure 5 leak sensor – plugging in1Leak sensor connection socketIs labeled
3.6 Rear of the instrument■■■■■■■■■■■■■■■■■■■■■■22■■■■■■■■881 Compact IC pro – Anion245613798Figure 6 Drainage tubings1Drainage tubing connectionFor d
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■23Installing drainage tubingsProceed as follows to install the drainage tubings:
3.7 Capillary and cable feed-throughs■■■■■■■■■■■■■■■■■■■■■■24■■■■■■■■881 Compact IC pro – Anion1231236745Figure 7 Capillary and cable feed-throughs1Ca
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■253.8 Eluent3.8.1 Connecting eluent bottleThe eluent is aspirated out of the e
3.8 Eluent■■■■■■■■■■■■■■■■■■■■■■26■■■■■■■■881 Compact IC pro – Anion1 234Figure 8 Installing eluent bottle attachment1Eluent aspiration tubing 6.1834.
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■27 4Install tubing weighting and aspiration filter1 2345Figure 10 Install tubing
3.8 Eluent■■■■■■■■■■■■■■■■■■■■■■28■■■■■■■■881 Compact IC pro – Anion■ Fasten the completely equipped bottle attachment (12-10) on theeluent bottle. Th
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■293Wadding4CO2 adsorberAdsorbs CO2 from the air (e.g. Merck sodalime with indica
TeachwareMetrohm AGCH-9100 [email protected] documentation is protected by copyright. All rights reserved.Although all the information
3.9 Eluent degasser■■■■■■■■■■■■■■■■■■■■■■30■■■■■■■■881 Compact IC pro – AnionConnecting the eluent degasser561234Figure 13 Eluent degasser1Eluent dega
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■313.10 High pressure pumpThe intelligent and low pulsation high pressure pump p
3.10 High pressure pump■■■■■■■■■■■■■■■■■■■■■■32■■■■■■■■881 Compact IC pro – Anion5Fastening screwsFor fastening the pump head.6Inlet valve holder7Pump
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■333Clamping screw4Eluent aspiration tubingEluent aspiration tubing (6.1834.080)
3.10 High pressure pump■■■■■■■■■■■■■■■■■■■■■■34■■■■■■■■881 Compact IC pro – Anion512675345Figure 16 Deaerate the high pressure pump1Syringe 10 mL (6.2
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■35 5Aspirating eluent■ Aspirate with the syringe (16-1) until bubble-free eluent
3.12 Pulsation absorber■■■■■■■■■■■■■■■■■■■■■■36■■■■■■■■881 Compact IC pro – Anion2 32 41Figure 17 Connecting the inline filter1Connection capillaryCon
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■371233456Figure 18 Pulsation absorber – Connection1Connection capillaryConnectio
3.13 Injection valve■■■■■■■■■■■■■■■■■■■■■■38■■■■■■■■881 Compact IC pro – Anion1234561234567777Figure 19 Injection valve – connected1Injection valve2Sa
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■393.13.2 Mode of operation of the injection valveThe injection valve (see Figur
■■■■■■■■■■■■■■■■■■■■■■Table of contents881 Compact IC pro – Anion■■■■■■■■IIITable of contents1 Introduction 11.1 Instrument description ...
3.14 Column heater■■■■■■■■■■■■■■■■■■■■■■40■■■■■■■■881 Compact IC pro – Anion3.13.3 Selecting the sample loopThe amount of sample solution injected de
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■4112234Figure 21 Column heater1Column holderFor engaging the column. With column
3.14 Column heater■■■■■■■■■■■■■■■■■■■■■■42■■■■■■■■881 Compact IC pro – AnionIn order to bring the eluent to the required temperature, the capillariesm
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■43 2Retracting capillaries1234555Figure 22 Column heater – Installing capillarie
3.15 Peristaltic pump■■■■■■■■■■■■■■■■■■■■■■44■■■■■■■■881 Compact IC pro – Anion■ Carefully bend the column input capillary (22-1) downward andslide it
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■456143257Figure 23 Peristaltic pump1Knurled screw in the mounting pin2Roller hub
3.15 Peristaltic pump■■■■■■■■■■■■■■■■■■■■■■46■■■■■■■■881 Compact IC pro – Anion3.15.2 Installing the peristaltic pump6.2744.16016.2744.1802 3 4 5 6 7
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■47 3Connecting the pressure sideNoteDepending on the use of the peristaltic pump
3.15 Peristaltic pump■■■■■■■■■■■■■■■■■■■■■■48■■■■■■■■881 Compact IC pro – Anion123Figure 26 Install pump tubing connection without filter1Union nut2Ad
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■49Pump tubing Adapter6.1826.340 (black/black)6.1826.360 (white/white)6.1826.380
Table of contents■■■■■■■■■■■■■■■■■■■■■■IV■■■■■■■■881 Compact IC pro – Anion3.12 Pulsation absorber ...
3.16 Metrohm Suppressor Module (MSM)■■■■■■■■■■■■■■■■■■■■■■50■■■■■■■■881 Compact IC pro – Anion3.16 Metrohm Suppressor Module (MSM)The MSM is used for
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■5113234567821Figure 27 Suppressor – connection capillaries1Union nut2Connecting
3.16 Metrohm Suppressor Module (MSM)■■■■■■■■■■■■■■■■■■■■■■52■■■■■■■■881 Compact IC pro – AnionConnect the PTFE capillaries firmly mounted on the conne
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■53 4Connecting the rinsing the solution outlet capillary■ Guide the other end of
3.18 Guard column■■■■■■■■■■■■■■■■■■■■■■54■■■■■■■■881 Compact IC pro – AnionThe mains cable is three-core and provided with a plug with grounding. Ifan
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■55NoteThe guard column may only be installed after the initial start-up (seeChap
3.19 Separation column■■■■■■■■■■■■■■■■■■■■■■56■■■■■■■■881 Compact IC pro – Anion3.19 Separation columnThe intelligent separation column (iColumn) is
■■■■■■■■■■■■■■■■■■■■■■3 Installation881 Compact IC pro – Anion■■■■■■■■57Connecting and rinsing the separation column 1Connect the separation columnCau
4.1 Initial start-up■■■■■■■■■■■■■■■■■■■■■■58■■■■■■■■881 Compact IC pro – Anion4 Start-upThe chapter Start-up is divided into 2 sections:Initial start
■■■■■■■■■■■■■■■■■■■■■■4 Start-up881 Compact IC pro – Anion■■■■■■■■59 4Deaerate the high pressure pump■ Deaerate the high pressure pump(s) via the purg
■■■■■■■■■■■■■■■■■■■■■■Table of contents881 Compact IC pro – Anion■■■■■■■■V5.9 Injection valve ...
4.2 Conditioning■■■■■■■■■■■■■■■■■■■■■■60■■■■■■■■881 Compact IC pro – Anion■ Select (or create) a suitable method. 2Preparing the instrument■ Ensure th
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■615 Operation and maintenance5.1 General notes5.1.1 CareWarningT
5.2 Capillary connections■■■■■■■■■■■■■■■■■■■■■■62■■■■■■■■881 Compact IC pro – Anion5.1.3 OperationCautionIn order to avoid disturbing temperature inf
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■635.3 DoorCautionThe door is made of PMMA (polymethylmetacrylate).
5.5 High pressure pump■■■■■■■■■■■■■■■■■■■■■■64■■■■■■■■881 Compact IC pro – Anion5.4.2 Operation5.4.2.1 Supply bottleThe supply bottle with the eluen
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■65CautionIn order to spare the pump seals, the pump should not be o
5.5 High pressure pump■■■■■■■■■■■■■■■■■■■■■■66■■■■■■■■881 Compact IC pro – AnionCleaning/replacing the zirconium oxide pistonClean one piston after th
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■67■ Remove the backup ring from the pump head and lay to the otherp
5.5 High pressure pump■■■■■■■■■■■■■■■■■■■■■■68■■■■■■■■881 Compact IC pro – Anionfor removing the old piston seal and a sleeve for inserting the new pi
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■6912Figure 31 Removing the piston seal1Piston seal2Tool for piston
Table of contents■■■■■■■■■■■■■■■■■■■■■■VI■■■■■■■■881 Compact IC pro – Anion8.2 Quality Management Principles ... 10
5.5 High pressure pump■■■■■■■■■■■■■■■■■■■■■■70■■■■■■■■881 Compact IC pro – Anion12Figure 33 Inserting the piston seal into the pump head 4Replacing th
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■711234Figure 34 Removing valves1Outlet valve holder2Outlet valveOrd
5.5 High pressure pump■■■■■■■■■■■■■■■■■■■■■■72■■■■■■■■881 Compact IC pro – Anion■ Place the valve with the seal faced downwards above the recessin the
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■73123567891098710546Figure 36 Components of the inlet valve and out
5.5 High pressure pump■■■■■■■■■■■■■■■■■■■■■■74■■■■■■■■881 Compact IC pro – Anion■ Place over the valve housing and hold it tightly.■ By tilting the to
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■75Mounting the pump headNoteTo prevent the pump head from being pos
5.6 Inline filter■■■■■■■■■■■■■■■■■■■■■■76■■■■■■■■881 Compact IC pro – AnionChanging the filterThe flow must be stopped before changing the filter. 1Re
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■775.7 Inline sample preparationTo protect the separation column (s
5.9 Injection valve■■■■■■■■■■■■■■■■■■■■■■78■■■■■■■■881 Compact IC pro – AnionThe time measured corresponds to the "transfer time". The rinsi
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■795.10 Peristaltic pump5.10.1 OperationThe pumping capacity of th
■■■■■■■■■■■■■■■■■■■■■■Table of figures881 Compact IC pro – Anion■■■■■■■■VIITable of figuresFigure 1 Front 881 Compact IC pro – Anion ...
5.10 Peristaltic pump■■■■■■■■■■■■■■■■■■■■■■80■■■■■■■■881 Compact IC pro – AnionTable 2 Pump tubingOrdernumberName Material InnerdiameterUse6.1826.020
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■81123Figure 38 Pump tubing connection – Changing the filter1Tubing
5.11 Metrohm Suppressor Module (MSM)■■■■■■■■■■■■■■■■■■■■■■82■■■■■■■■881 Compact IC pro – Anion5.11.2 Operation Suppressor NoteThe suppressor units mu
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■835.11.3 Maintenance5.11.3.1 Parts of the suppressor12345Figure 3
5.11 Metrohm Suppressor Module (MSM)■■■■■■■■■■■■■■■■■■■■■■84■■■■■■■■881 Compact IC pro – AnionRegenerating the suppressor 1Disconnecting the suppresso
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■855.11.3.3 Cleaning the suppressor In the following cases, it may
5.11 Metrohm Suppressor Module (MSM)■■■■■■■■■■■■■■■■■■■■■■86■■■■■■■■881 Compact IC pro – Anion 5Inserting the rotorCautionAn incorrectly inserted roto
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■87Replacing parts of the suppressorReplace the parts of the suppres
5.12 Separation column■■■■■■■■■■■■■■■■■■■■■■88■■■■■■■■881 Compact IC pro – Anion 6Inserting the new connecting piece■ Insert the connecting piece (39-
■■■■■■■■■■■■■■■■■■■■■■5 Operation and maintenance881 Compact IC pro – Anion■■■■■■■■89column at http://www.metrohm.com (product area Ion Chromatography
Comentários a estes Manuais